Evaluate Weigh the pros and cons of technologies, products and projects you are considering.

Mapping WAN application acceleration techniques to critical apps

Use this primer on wide area network (WAN) application acceleration techniques to understand which network optimization tools are appropriate for optimizing critical applications.

Which WAN optimization techniques should you use to accelerate particular applications? Use this primer on wide area network (WAN) application acceleration to map critical applications to techniques.

Basic WAN acceleration techniques

Application delivery optimization (ADO) is the design and deployment of networks and systems to guarantee appropriate, effective application delivery in the mobile and distributed world. WAN optimization is a cornerstone technology in the ADO toolkit. The trick is selecting the right optimization tools to solve your organization's particular application performance problems.

The basic techniques available to WAN optimizers are as follows:

WAN application acceleration technique for large file transfers/backups

Compression, caching and deduplication improve network performance by reducing the amount of traffic sent over the wire. Some optimizers accomplish this using standard file compression techniques, the same kinds that go into compressing a file on a server. Others use some variation on the data dictionary, by cataloging bit patterns in the input, sending each pattern through only the first time it is seen, and subsequently sending an index to that pattern any time it recurs.

When WAN managers should use compression, caching and deduplication: This helps most if performance issues center around moving large files from place to place: backing up or replicating data from one location to another or moving large streams of bulky text data, such as XML-formatted messages flowing among elements in a service-oriented architecture, or EDI or HL7 data.

WAN application acceleration technique for bulky protocols

Protocol accelerators compensate for the shortcomings in applications' network protocols. Many network applications have

More on WAN application acceleration
Basic WAN bandwidth optimization techniques  

WAN video conferencing network design requirements for QoS  

Comparing WAN optimization controller vendors 

An introduction to using WAN optimization for application delivery  

WAN optimization enhances disaster recovery plans  

Finding the right WAN optimization tools for line cards
protocols developed in low-load, high-bandwidth environments. Running across high-latency, low-bandwidth, lossy or jittery WAN or Internet links exposes the weaknesses in such protocols. For example, some protocols are chatty, sending long request/response chains back and forth. Add high WAN latency to each roundtrip and the application becomes painfully slow. And, of course, TCP, which underlies most application protocols, has its own problems with flow control, being slow to ramp up transmission speeds when network conditions are good and quick to drop them down drastically when links get congested.

Accelerators can cheat chatty protocols, faking answers at each end to speed up operations. They can also monkey with TCP flow control for more intelligent ramping of transmission speeds, up or down.

When WAN managers should use protocol accelerators: Most (but not all) TCP-based protocols can benefit from acceleration via improved flow controls. Among those that are only moderately or slightly improved are RDP and SSH. TCP accelerators do nothing for UDP-based protocols, such as those used for VoIP and video conferencing, but some appliances can help such traffic in other ways. Many older LAN protocols, such as Microsoft's pre-Vista standard for file server traffic, called Server Message Blocks (SMB), aka the common Internet file system (CIFS), are classically chatty and greatly accelerable.

WAN application acceleration technique for lossy WAN links, voice, video and remote desktops

Traffic conditioning tries to make up for some of the weaknesses in the network, remediating packet loss, for example. It can also make up for applications sending small amounts of data in packets with large overhead. UDP applications, which do not do TCP-style flow control, are especially vulnerable to loss.

Traffic conditioners can repackage small, high-overhead packets into larger, lower-overhead ones or employ error correction techniques to allow lost packets to be reconstructed rather than retransmitted.

When WAN managers should use traffic conditioners: Use traffic conditioning when you have lossy WAN links, especially if you need to send real-time traffic streams over them: Voice, video and remote desktops hate re-transmits!

WAN application acceleration technique for real-time protocols

Traffic shaping is aimed at making sure an organization has some control over how it consumes bandwidth; traffic shaping guarantees that certain applications, devices or users get (or don't get) bandwidth. It can involve quality of service (QoS) settings, manipulating traffic flow rates, queuing (parking packets in buffers, or queues, to await delivery after higher-priority packets), and connection-closing (sending a "close" packet to one or both ends of a stream to shut it down).

When WAN managers should use traffic shaping: Traffic shaping can make the biggest difference when real-time protocols such as VoIP, video conferencing and virtual desktops are suffering. It can also help make sure sanctioned traffic has priority over recreational traffic.

When to use WAN application acceleration in general

Most application performance problems over WANs can be remedied, or at least mitigated, through judicious deployment of WAN optimization tools. Different solutions have differing strengths, be they in compression, acceleration, conditioning or shaping. It is critical to do proof-of-concept deployments to diagnose application delivery problems and test various solutions for the underlying protocol or network problems at the root of the performance issues.

John Burke, Principal Research Analyst, Nemertes Research
John Burke

About the author
John Burke is principal research analyst with Nemertes Research. With nearly two decades of technology experience, he has worked at all levels of IT, including end-user support specialist, programmer, system administrator, database specialist, network administrator, network architect and systems architect. He has worked at Johns Hopkins University, the College of St. Catherine, and the University of St. Thomas.

This was last published in July 2010

Dig Deeper on WAN optimization and performance

Start the conversation

Send me notifications when other members comment.

Please create a username to comment.