NAK

The NAK, REJ, or ARQ signal is typically sent by the recipient of a message (destination) back to the sender (source) after the receipt of an unrecognizable block of data of specific size. When the source receives a NAK or REJ signal from the destination, the source either repeats the block of data until the destination station recognizes the protocol and responds with an ACK (acknowledgment or acknowledged) signal, or else stops transmission entirely. When the source receives an ARQ signal from the destination, the source retransmits the block of data.

NAK, REJ, or ARQ signals are special ASCII characters reserved so they are not confused with data characters.

Compare ACK.

Do you have something to add to this definition? Let us know. Send your comments to techterms@whatis.com

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT What do routers use MAC addresses for? Find out what routers do with MAC addresses and why they're needed in this response from routing and switching expert Sudhanshu Gupta. What makes a WAN different from a LAN and MAN? Learn the basics of networking in this expert explanation of the differences between WANs, LANs and MANs -- how they connect and which protocols they... The difference between half-duplex and full-duplex Our networking fundamentals expert explains how to know if you're using half-duplex or full-duplex communication in this Ask the Expert response.

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary availability  (SearchNetworking.com) 1) In a telephone circuit, availability is the ratio between the time during which the circuit is operational and elapsed time. 2) In a network... carrier detect  (SearchNetworking.com)