routing table

A routing table contains the information necessary to forward a packet along the best path toward its destination. Each packet contains information about its origin and destination. When a packet is received, a network device examines the packet and matches it to the routing table entry providing the best match for its destination. The table then provides the device with instructions for sending the packet to the next hop on its route across the network.

A basic routing table includes the following information:

• Destination: The IP address of the packet's final destination
• Next hop: The IP address to which the packet is forwarded
• Interface: The outgoing network interface the device should use when forwarding the packet to the next hop or final destination
• Metric: Assigns a cost to each available route so that the most cost-effective path can be chosen
• Routes: Includes directly-attached subnets, indirect subnets that are not attached to the device but can be accessed through one or more hops, and default routes to use for certain types of traffic or when information is lacking.

  Routing tables can be maintained manually or dynamically. Tables for static network devices do not change unless a network administrator manually changes them. In dynamic routing, devices build and maintain their routing tables automatically by using routing protocols to exchange information about the surrounding network topology. Dynamic routing tables allow devices to "listen" to the network and respond to occurrences like device failures and network congestion.

  LAST UPDATED:

  18 Apr 2007

  Read more about routing table: - The Linux Documentation Project offers an easy-to-read overview of IP routing, including routing tables.

  
  
  

  Do you have something to add to this definition? Let us know. Send your comments to techterms@whatis.com

  
  
  

  Digg This!     StumbleUpon     Del.icio.us

  
  
  

  RELATED CONTENT Why are IPv6's IP addresses in hexadecimal formatting? Why would IPv6 use hexadecimal formatting if it's so user unfriendly, and what sort of workarounds are there to make IP addressing easier? Find out in... Prevent IP address conflicts on your wireless network by managing DHCP scopes Wireless access points in a wired network can cause IP address conflicts because APs are configured to act as DHCP servers. Get IPv6 skills now rather than later Networking professionals are in no hurry to build up their IPv6 skills, but experts say they should start now, before IPv4 addresses run out.

  RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary 32-bit IP addressing  (SearchNetworking.com) 32-bit IP addressing is the IP address scheme used in Internet Protocol 4 (IPv6 uses a 128-bit system)... (Continued) fixed-length subnet mask  (SearchNetworking.com) A fixed-length subnet mask (FLSM) is a sequence of numbers of unchanging length that streamlines packet routing within the subnets of a proprietary...