tree network

The illustration shows a tree network with five star networks connected to a common bus. The workstations are shown as small spheres, the central computers of the star networks are shown as larger spheres, connections within star networks are shown as short lines, and the bus is shown as a long, heavy line. The connections can consist of wire cables, optical fiber cables, or wireless links.

The tree network topology is ideal when the workstations are located in groups, with each group occupying a relatively small physical region. An example is a university campus in which each building has its own star network, and all the central computers are linked in a campus-wide system. It is easy to add or remove workstations from each star network. Entire star networks can be added to, or removed from, the bus. If the bus has low loss and/or is equipped with repeaters, this topology can be used in a wide area network (WAN) configuration.

In a tree network, a cable failure in one of the star networks will isolate the workstation that it links to the central computer of that star network, but only that workstation will be isolated. All the other workstations will continue to function normally, except that they will not be able to communicate with the isolated workstation. If any workstation goes down, none of the other workstations will be affected. If a central computer goes down, the entire portion of the network served by it will suffer degraded performance or complete failure, but rest of the network will continue to function normally. If the bus is broken, serious network disruption may occur. If redundancy is needed, the central computers of the star networks can be interconnected in a mesh network topology.

Do you have something to add to this definition? Let us know. Send your comments to techterms@whatis.com

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT Q&A: Jim Metzler previews the networking track at Interop SearchNetworking.com talked to Dr. Jim Metzler, chair the networking track at this year's Interop Las Vegas, about the hot networking topics that will... Extreme's port extender can replace consumer devices at network edge : A new port extender from Extreme Networks, the ReachNXT, can replace consumer-grade edge networking devices from Netgear and Linksys. VLANs versus IP subnets: Why use a VLAN over IP subnetting? A virtual local area network (VLAN) is better than IP subnetting because its advantage is security. Learn what a VLAN is and how it differs from...

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary 32-bit IP addressing  (SearchNetworking.com) 32-bit IP addressing is the IP address scheme used in Internet Protocol 4 (IPv6 uses a 128-bit system)... (Continued) ARCNET  (SearchNetworking.com) ARCNET is a widely-installed local area network (LAN) technology that uses a token-bus scheme for managing line sharing among the workstations and...