Packet-Level Procedure

2) PAP (Password Authentication Procedure) is a procedure used by Point-to-Point Protocol servers to validate a connection request. PAP works as follows:

1. After the link is established, the requestor sends a password and an id to the server.
2. The server either validates the request and sends back an acknowledgement, terminates the connection, or offers the requestor another chance.

Passwords are sent without security and the originator can make repeated attempts to gain access. For these reasons, a server that supports Challenge-Handshake Authentication Protocol will offer to use that protocol before using PAP. PAP protocol details can be found in RFC 1334.

Read more about Packet-Level Procedure: - Visit SearchNetworking.com for more information on Packet-Level Procedure.

Do you have something to add to this definition? Let us know. Send your comments to techterms@whatis.com

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT Q&A: Jim Metzler previews the networking track at Interop SearchNetworking.com talked to Dr. Jim Metzler, chair the networking track at this year's Interop Las Vegas, about the hot networking topics that will... Extreme's port extender can replace consumer devices at network edge : A new port extender from Extreme Networks, the ReachNXT, can replace consumer-grade edge networking devices from Netgear and Linksys. VLANs versus IP subnets: Why use a VLAN over IP subnetting? A virtual local area network (VLAN) is better than IP subnetting because its advantage is security. Learn what a VLAN is and how it differs from...

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary 32-bit IP addressing  (SearchNetworking.com) 32-bit IP addressing is the IP address scheme used in Internet Protocol 4 (IPv6 uses a 128-bit system)... (Continued) ARCNET  (SearchNetworking.com) ARCNET is a widely-installed local area network (LAN) technology that uses a token-bus scheme for managing line sharing among the workstations and...