OSPF

Using OSPF, a host that obtains a change to a routing table or detects a change in the network immediately multicasts the information to all other hosts in the network so that all will have the same routing table information. Unlike the RIP in which the entire routing table is sent, the host using OSPF sends only the part that has changed. With RIP, the routing table is sent to a neighbor host every 30 seconds. OSPF multicasts the updated information only when a change has taken place.

Rather than simply counting the number of hops, OSPF bases its path descriptions on "link states" that take into account additional network information. OSPF also lets the user assign cost metrics to a given host router so that some paths are given preference. OSPF supports a variable network subnet mask so that a network can be subdivided. RIP is supported within OSPF for router-to-end station communication. Since many networks using RIP are already in use, router manufacturers tend to include RIP support within a router designed primarily for OSPF.

Read more about OSPF: - Cisco provides an illustrated paper about the Open Shortest Path First (OSPF) protocol. - The IETF Network Working Group Request for Comments 2178 is the authoritative description of OSPF Version 2 .

Do you have something to add to this definition? Let us know. Send your comments to techterms@whatis.com

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT Avoiding private IP security risks in public networks A shortage of public IP addresses for new services looms, but telecom providers should avoid the security dangers of using private IP addresses... Enterprise IPv6 upgrades mean new service provider opportunity In this podcast, IPv6 expert and Cisco technical leader Chip Popoviciu shares his advice on how service providers can turn an IPv6 upgrade into a new... Juniper adds Comcast to cable operators deploying Carrier Ethernet Juniper Networks is making headway selling Carrier Ethernet routers to cable operators, whose networks are looking more like those of traditional...

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary BGP  (SearchTelecom.com) BGP (Border Gateway Protocol) is a protocol for exchanging routing information between gateway hosts (each with its own router) in a network of... CDMA  (SearchTelecom.com) CDMA (Code-Division Multiple Access) refers to any of several protocols used in so-called second-generation (2G) and third-generation...