Network Management Strategies for the CIO
Email Alerts
-
Can a router be configured to automatically connect to the Internet even when the server is off?
Ask the Expert
-
Will my company need to buy new equipment for the upgrade to IPV6?
Ask the Expert
-
Is there any limitation for using Category 5e cable in the data network?
Ask the Expert
-
Establishing communication between two networks via switches
I have two 3Com layer 3 switches (4924) connecting to two separate networks in a building. How do I configure these switches so that the communication can be established between the two networks?
These two networks are on the first and second flo... Ask the Expert
-
How do I open port 177 on my router so that other clients can get a GUI display of my server remotel
Ask the Expert
-
How to share two T1s on one router
I have a Cisco 1760 router with two T1 WICs and two T1 lines. Can you tell me if how to share both T1s for load balancing and also for failover capabilities? Thank you. Ask the Expert
-
How can I share my Internet connection between two routers?
I want to connect two routers to my Internet connection. The first is a VPN connection consisting of a Cisco 501 switch and an Aironet 1200 wireless router that uses a static address for the connection and connects to a work server where it is valida... Ask the Expert
-
How do you get five switches to talk without using a routing protocol?
I want to add five catalyst 3550 IOS switches to a single 4506 Cisco router so that each switch will have its own subnet. 192.168.10.0, 192.168.11.0, etc.. how do you get all five switches to talk without using an routing protocol like OSPF or RIP or... Ask the Expert
-
How do I set up my network's Internet connection?
Ask the Expert
-
Can you help with load balance?
Ask the Expert