What makes a WAN different from a LAN and MAN?

Digg This!     StumbleUpon     Del.icio.us

RELATED CONTENT Networking fundamentals VLANs versus IP subnets: Why use a VLAN over IP subnetting? Difference between circuit-switching and packet-switching in examples Can Network Address Translation work without static IP addresses? Can building T3 lines using satellite be cheaper than a carriers'? Can IP addresses of LANs that make up a WAN be the same? How each wireless technology differs: Wi-Fi, WiMax and WLANs Do multiple router interfaces affect the amount of IP addresses? How can I prevent collisions on my network? The difference between half-duplex and full-duplex What is a logical network? How do you improve one? Network Administration How server virtualization improves efficiency in a client-server model Understand Windows tracert output to troubleshoot network connectivity Why would a computer show drive letters for discs that don't exist? Using tracert and TTL to troubleshoot network connectivity problems Open source software for enterprise network management and monitoring When do applications suffer from poor network performance? Tight times? Organize your networking group to stay above the stress Managing Network Problem Users: The make-it-so CEO Checking IP configuration to troubleshoot Windows network connectivity Bandwidth allocation: How can I give a download limit for each user? Network Administration Research LANs (Local Area Networks) Q&A: Jim Metzler previews the networking track at Interop Extreme's port extender can replace consumer devices at network edge VLANs versus IP subnets: Why use a VLAN over IP subnetting? Troubleshooting VLANs: How to monitor 802.1q tagged traffic Top 10 networking advice of 2008 During a recession, align the network with business priorities LANs vs. WLANs: Which network designs are used for each company size? Best practices for securing your wireless LAN HTTP error code troubleshooting, Part 1: HTTP status codes defined How do I set up multiple VLANs on a single switch?

RELATED GLOSSARY TERMS Terms from Whatis.com − the technology online dictionary availability  (SearchNetworking.com) carrier detect  (SearchNetworking.com) fiber jumper  (SearchNetworking.com) layer 2  (SearchNetworking.com) MAE  (SearchNetworking.com) Network layer  (SearchNetworking.com) networking  (SearchNetworking.com) OSI  (SearchNetworking.com) patch cord  (SearchNetworking.com) staggered quadrature phase-shift keying  (SearchNetworking.com)

RELATED RESOURCES 2020software.com, trial software downloads for accounting software, ERP software, CRM software and business software systems Search Bitpipe.com for the latest white papers and business webcasts Whatis.com, the online computer dictionary

The terms you mention in your question are frequently come by in today's network books and discussions. WAN (Wide Area Network) is used to describe large scale networks that extend across areas, cities and even countries around the globe. International companies with offices around the world use various methods to interconnect them between each other, allowing them to freely exchange data, voice and other services. The speed in which these huge networks run at are relatively small, mainly due to the high costs involved.

On the other side, LAN (Local Area Networks) are found in every type of company, office and home. These "small" networks (compared to WAN networks) are fast, much cheaper and easy to maintain in most situations. Today, we have LAN networks running at speeds that touch the 10 Gbps mark, making them lightening fast. The equipment required to run these networks is not considered that expensive, plus, they are easy to maintain.

MAN (Metropolitan Area Networks) are somewhere in between WAN and LAN networks. They can spread over a city or two and connect smaller office (LAN) networks between them. The equipment required to run them can be a bit expensive and the speeds they usually reach are the 50-100 Mbps mark depending on the way they interconnect.

Each type of network uses their own special set of protocols in order to ensure they operate in the most efficient way, without outages and problems. These protocols vary depending on the type of network. For example, LAN networks usually run the Ethernet Protocol allowing local nodes/workstations to communicate between each other.

STP (Spanning Tree Protocol) is also another frequently used protocol that makes sure no network loops are created between switches. MAN and WAN protocols may use routing protocols whose job is to make sure everyone knows about the available networks and how they can be reached.

In WAN protocols, you also won't find traditional equipment such as switches or hubs. They only exist in the LAN networks. WAN and MAN networks make use of more sophisticated equipment such as routers that are designed to help connect between each other at high speeds. Routers are found at the boundary of a LAN network, connecting them to larger networks (WANs).

I hope this brief introduction helps make things a big more clearer. For more information, please visit SearchNetworking.com's networking FAQ guide.