 |
|
|
| > |
QUESTION POSED ON: 21 February 2008
Will WAN optimization work if I have compression enabled on my host devices?
|
|
| > |
EXPERT RESPONSE
The short answer is "yes." There are several facets to WAN optimization that can be combined to deliver significant performance improvements on pre-compressed traffic. These include the following:
- Network integrity: This refers to techniques such as Forward Error Correction (FEC) and Packet Order Correction (POC) that improve congestion and packet delivery challenges in the WAN itself. For example, if you are using MPLS or IP VPN as your WAN technology, you may be experiencing lost or out-of-order packets that are hurting application performance. By fixing these issues you will see significant performance improvements across the WAN even if the data is already compressed.
- Application/protocol acceleration: There are various techniques that can be used to overcome latency across the WAN due to TCP and other chatty protocols (eg CIFS). These techniques will work irrespective of whether the traffic is compressed or uncompressed.
- Data reduction: This is the one area that may be impacted by compression on the host device. Data reduction, which eliminates the transfer of duplicate data across the WAN, works best on uncompressed traffic when the WAN optimization device has full visibility into the entire data set. However, that is not to say that it still cannot provide value on pre-compressed data. The degree of performance gain will vary depending upon how compressed the traffic is and how much repetitive data is sent.
In conclusion, enabling host compression may reduce the amount of data reduction you can achieve across the WAN, but there are still several aspects of optimization that will provide real value when sending this traffic across the WAN.
|
|
|
|
|
|
|
|
Search and Browse the Expert Answer Center
Search and browse more than 25,000 question and
answer pairs from more than 250 TechTarget industry experts.
|
|
|
|
|
|
|
|
|
|
|
|
