We are upgrading to the 802.11n standard soon, and I'm wondering how many devices one access point can control...
By submitting your email address, you agree to receive emails regarding relevant topic offers from TechTarget and its partners. You can withdraw your consent at any time. Contact TechTarget at 275 Grove Street, Newton, MA.
following the upgrade.
Based on the 11n standard, you can logically control up to 255 devices. But in practice, a single access point (AP) would have a problem handling that many. As the number of devices increases, the overhead on the AP also grows. This degrades AP performance and limits the absolute throughput per device. So, in practice, manufacturers set AP capacity limits that are lower than the 225-device ceiling.
Xirrus Inc. offers new type of 802.11 access point
All about optimizing SSID configurations
How to increase WLAN capacity
The real question, however, is this: How many devices can access a single AP before performance starts to degrade? The answer: Not that many. A rule of thumb is that, above 16 devices, performance begins to worsen noticeably. In any case, it is important to consider that Wi-Fi is not like cellular wireless: Generally, the amount of intelligence in the wireless router is not sufficient enough to provide a lot of contention management. This is both a virtue as well as a liability for Wi-Fi. It is cheap because it is less complex, but it is less capable as a result. The advantage, however, is that it is relatively straightforward to just place lots of APs in a given area, and by paying attention to things like coverage and overlap, achieve a relatively seamless user experience.
Fortunately, tools do exist to make coverage considerations somewhat less like rule of thumb. Simulation software can give you a sense of dead zones and what kind of performance you'll get at your location. The software is relatively expensive, however, and it may not get a lot of use after installation. If you know you are going to be expanding or modifying your Wi-Fi coverage in the future, simulation software can be a good investment. On the other hand, if you are planning a fairly static environment, purchasing the software may not be economically justifiable.
Dig Deeper on Wireless LAN Implementation
Related Q&A from Mike Jude
An expert says it's important to figure out your big data objectives before purchasing hardware or software from a vendor.continue reading
Software management at the device level is key to mitigating security risks in the enterprise when IoT arrives.continue reading
The development of 5G is gaining buzz, but is it too early to seriously discuss 5G for mobile networks? Mike Jude explains the issues.continue reading
Have a question for an expert?
Please add a title for your question
Get answers from a TechTarget expert on whatever's puzzling you.