Configuring VLANs on a Cisco Catalyst 3750 and Catalyst 2950 together

I connected a Cisco Catalyst 3750 switch and a Cisco Catalyst 2950 switch between an E1 Link and configured the two VLAN and trunk ports in each of the 2950 and 3750 switches. If I configure the Mac binding and storm-control in the 3750 switch, the time default VLAN works fine but the other VLAN is not able to access the server. Why is this? What should I do?

    Requires Free Membership to View

    Login

A: Please check if you have added all other VLANs in the trunk or not. Also, see if you have enabled routing for the VLANs or if all the ports are in access-mode.

This was first published in March 2010

Join the conversationComment

Share
Comments

    Results

    Contribute to the conversation

    All fields are required. Comments will appear at the bottom of the article.
    Back to top