The IP address number 0.0.0.0 is a nonroutable IPv4 address with several uses, primarily as a default or placeholder address. Even though 0.0.0.0 has several uses on computer networks, it is not a general-purpose device address.
The Internet Engineering Task Force defines the IP address 0.0.0.0 as a reserved, special-purpose address for "this host, this network." Its IPv6 equivalent is expressed as ::/0. Although 0.0.0.0 is valid address syntax, a client device using it as a source IP address cannot communicate on a network.
IPv4 address numbers start with 0.0.0.0 and go up to 255.255.255.255.
In the simplest terms, the IP address 0.0.0.0 means "this network," but it is not a usable address in the traditional sense. It is a little like a note that says, "Insert address here," or, depending on the context, "no specific destination address." It acts as a stand-in until a valid, routable IP address is assigned. It can appear as a result of an error or be assigned intentionally.
For example, if a device like a computer or printer is assigned the client IP address 0.0.0.0, it usually means the device is unable to connect to and communicate on a network. In other instances, such as routing, it is used intentionally as a default route when a more specific route to the destination address is unavailable.
One use of IP address 0.0.0.0 is during system initialization, when a device adopts it before being assigned a usable IP address. Similarly, it can also display as a result of a Dynamic Host Configuration Protocol (DHCP) error. A Windows client that experiences this error and supports Automatic Private IP Addressing will assign itself an IP address within the range of 169.254.1.0 through 169.254.254.255. It will use 0.0.0.0 as the gateway address.
Other ways to use the IP address 0.0.0.0 include the following:
It is easy to confuse IP addresses 127.0.0.0 and 0.0.0.0, as both are considered class A, special-purpose IPv4 addresses that are used by hosts for self-identification.
While 127.0.0.0 and 0.0.0.0 share some similar traits, the most notable difference between the two is their function. As previously stated, IP address 0.0.0.0 has several uses. However, 127.0.0.0 has one main purpose: It is reserved for loopback traffic -- that is, communications within a single host.
IP address 127.0.0.0 is often compared to a closed circuit because any packet sent to 127.0.0.0 -- or any address in the 127.0.0.0-127.255.255.255 block -- will be returned to the same machine. Packets sent to 127.0.0.0 cannot enter a local network, and the transmission is managed by the host's OS, as opposed to the network interface card. As a result, 127.0.0.0 is typically used for testing and troubleshooting purposes. It is also known by the hostname localhost.
Addresses within the 127.0.0.0/8 block do not appear on a network. The IPv6 equivalent of 127.0.0.0 is ::1.
If a computer is configured for TCP/IP networking and shows 0.0.0.0 as its IP address, the following troubleshooting steps can be taken to try to obtain a valid IP address:
15 Jul 2021