Q

Can a Cisco 801 be configured on a dedicated 128KB ISDN line?

Can a Cisco 801 be configured on a dedicated 128KB ISDN line? Could you kindly provide a basic set up command for...

router IP: 202.54.1.23 and remote router IP: 61.11.24.4 Try this:

interface BRI0
 ip address 202.54.1.23 <subnet mask>
 encapsulation ppp
 dialer map IP 61.11.24.4 name <other router hostname> <its SPID>
 dialer-group 1
 ppp authentication chap
 isdn spid1 <number>
 isdn spid2 <number>
 ppp multilink 
 dialer load-threshold <load> either

dialer-list 1 permit ip any any

Here you can specify 1 to bring both channels up at the same time. if you specify 255 second channel will come up when first is 100% utilized and similarly you can give any number between 1 – 255.

Similarly you can configure the other end.

interface BRI0
 ip address 61.11.24.4 <subnet mask>
 encapsulation ppp
 dialer map IP 202.54.1.23 name <other router hostname> <its SPID>
 dialer-group 1
 ppp authentication chap
 isdn spid1 <number>
 isdn spid2 <number>
 ppp multilink 
 dialer load-threshold <load> either

dialer-list 1 permit ip any any


This was last published in July 2003

Dig Deeper on Network Hardware

PRO+

Content

Find more PRO+ content and other member only offers, here.

Have a question for an expert?

Please add a title for your question

Get answers from a TechTarget expert on whatever's puzzling you.

You will be able to add details on the next page.

Start the conversation

Send me notifications when other members comment.

By submitting you agree to receive email from TechTarget and its partners. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. Privacy

Please create a username to comment.

-ADS BY GOOGLE

SearchSDN

SearchEnterpriseWAN

SearchUnifiedCommunications

SearchMobileComputing

SearchDataCenter

SearchITChannel

Close